1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher Diagnosis Help Please

Discussion in 'Fisher Engineering Discussion' started by Bachand, Feb 23, 2007.

  1. Bachand

    Bachand Junior Member
    Messages: 17

    Ok, my plow was very slow going last week, yesterday I hooked it up and ithe mother runs but no movement.

    I Replaced the pump under the motor, the gasket, and the o-ring and spring under the motor.

    I changed all the fluid, removing the angle cylinders, and manually moving it side to side to drain the fluid.

    Now, with a new PUMP, Fresh fluid, it still just spins and no plow movement.

    I know the motor works, because I hear it, and when i took it off I can see it spin. Is it possible that under load it is slipping? or is my problem elsewhere?
     
  2. chaseatg

    chaseatg Member
    Messages: 94

    Your problem is somewhere else.
    What type of hyd unit do you have?
    Elect control or cable control?
     
  3. LON

    LON Senior Member
    Messages: 749

    Which pump is it - SEHP, Insta-Act, ?
    Sounds like a pump relief hanging open or backed off