1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher blinker problem

Discussion in 'Fisher Engineering Discussion' started by aquku, Nov 23, 2011.

  1. aquku

    aquku Member
    from 14432
    Messages: 40

    Fisher minute mount plow system on a 99 Ford F350

    All lights and blinkers work when plow is not being used. However, as soon as we power the plow, up or side to side, the blinkers turn off. Then, when to plow stops moving, lights come back on. Any help would be appreciated....
     
  2. chevyzrule810

    chevyzrule810 PlowSite.com Addict
    Messages: 1,239

    Sounds like a loose ground wire or a broken wire that looses its connection when the plow is moving then makes a connection when the plow is still.Check and make sure all your grounds are clean and tight.Another thing you could try is have someone move the plow side to side with controller while you wiggle the plug to see if the lights come back on.Then you know its the trucks light plug. Welcome to plowsite!
     
  3. aquku

    aquku Member
    from 14432
    Messages: 40

    thanks...will take a look today!
     
  4. aquku

    aquku Member
    from 14432
    Messages: 40

    Checked all the gounds, cleaned all grounds and wire connections, wiggle every wire, but still the problem persists...Any other suggestions out there??