1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher 7'6 Minute mount Plow not complete

Discussion in 'Used Plowing and Truck Equipment Forum' started by ColvinsPS, Dec 28, 2010.

  1. ColvinsPS

    ColvinsPS Member
    Messages: 73

    I have a 7'6 Minute mount plow that i purchased complete but i took the insta act pump with rams and lines to use on my other plow.

    This would include a good 7'6 blade with minimal rust and the headgear and a frame.
    I do have an underhood older style hydraulic pump that runs off a pulley on your engine. I have the pump and the three main lines as well as the cable controller. I have 3 older rams that you can have with it if you want but i have been keeping as spares.

    Your other option is to just buy the headgear and blade and find a insta act pump or the sehp setup pump and the rams, lines, and pins.

    Just to clarify... Plow is not complete but the blade and headgear is in good shape.
    $700 for blade and headgear or $900 for everything else mentioned.

    I can get some pics up later since i cant find them on my laptop.
    Pm or email me for more info if interested.
     
  2. ColvinsPS

    ColvinsPS Member
    Messages: 73

    Here are some cell phone pics

    7.5 plow.jpg

    7.5 plow 1.jpg
     
  3. ColvinsPS

    ColvinsPS Member
    Messages: 73

    I am willing to hear offers. Maybe some trades.
     
  4. PowersTree

    PowersTree Senior Member
    Messages: 586

    I'm on my phone, and can't see your location. Where are you located?
     
  5. ColvinsPS

    ColvinsPS Member
    Messages: 73

    South central PA Glen Rock to be more exact.
     
  6. PowersTree

    PowersTree Senior Member
    Messages: 586

    Yeah thats a bit of a hike. If I could figure out how to get it to Michigan, for $500, Id be ALL over it.

    Bump for a good deal. I like that I woulda replaced all of the Hydros, and wiring (the problems) and have a newish plow.
     
  7. rgrimes945

    rgrimes945 Senior Member
    Messages: 134

    plow

    you still have the plow ?
     
  8. rgrimes945

    rgrimes945 Senior Member
    Messages: 134

    Call me 919-792-7391 R Grimes
     
  9. ColvinsPS

    ColvinsPS Member
    Messages: 73

    yes i still have it. I will try to call you here this morning.
     
  10. ColvinsPS

    ColvinsPS Member
    Messages: 73

    I tried to call you and didn't get an answer and your phone said i couldn't leave a message. Either call me back, post here, or pm me i am willing to answer whatever questions you have.
     
  11. ColvinsPS

    ColvinsPS Member
    Messages: 73

    bump.. its just sitting out there not being used which is wasteful.. someone put it to good use!
     
  12. ColvinsPS

    ColvinsPS Member
    Messages: 73

    bump... someone needs this!
     
  13. PowersTree

    PowersTree Senior Member
    Messages: 586

    I do. Just wish you were closer.
     
  14. tastebeer

    tastebeer Member
    Messages: 81

    will this work on a 9ft hd same style plow?
     
  15. ColvinsPS

    ColvinsPS Member
    Messages: 73

    Will what work? I am not sure what you are asking about?
     
  16. ColvinsPS

    ColvinsPS Member
    Messages: 73

    bump... if i had another truck to put this on i would because i have been using mine a good bit so far this year. Somebody needs this
     
  17. dgc

    dgc Junior Member
    Messages: 13

    You still have it. I'm located in chambersburg
     
  18. ColvinsPS

    ColvinsPS Member
    Messages: 73

    Yes i do. Come get it. Possible big storm Tues-Thurs next week.
    PM me for phone number if you want.
     
  19. nepagearjammer

    nepagearjammer Member
    from nepa
    Messages: 44

    Do you still have this???? I have a 6'9" mm1 setup that I don't want to put on my cheby 1 ton(duh). would you take 500.00?? or have some use for my smaller plow and headgear?
     
  20. ColvinsPS

    ColvinsPS Member
    Messages: 73

    I still have it. Let's talk call me tomorrow 717 sevn nine 3 o eight nine l