1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Fisher 1000 problems

Discussion in 'Ice Management' started by FreshGrounder1, Feb 23, 2011.

  1. FreshGrounder1

    FreshGrounder1 Junior Member
    Messages: 26

    Spreader was working fine till the 3rd hopper fill. The control says its on and working no redlight for a jam or anything, yet, the auger and spin wheel aren't moving even after unloading the damn thing by hand. blown motor??? any ideas?
  2. racer47

    racer47 Senior Member
    Messages: 320

    unhook spreader from harness hook battery to spreader moter see it it will run control might be bad or connection to spreader
  3. dyllan78

    dyllan78 Member
    Messages: 45

    I had that happen to me, Opened the box inside and found the shaft broken by the motor.
  4. Snow Commandor

    Snow Commandor Senior Member
    from 07666
    Messages: 438

    Unplug the spreader from the harness and use a test light to check if power's coming to the plug. If you have power @ the plug then do what racer47 said & check the spreader motor. Good luck!