1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

fish stick on diamond

Discussion in 'Meyer / Diamond Products Discussion' started by ed39, Jan 4, 2011.

  1. ed39

    ed39 Senior Member
    Messages: 120

    i was able to get a fish stick dirt cheap and wanna convert it to my diamond set up. im going to make a harness that adapts the 2 different style connectors. both use the same 6 wire controller set up... some one check me if im wrong

    Fish stick wires:
    lt blue solenoid s3-left?
    lt grn solenoid s2- right?
    white/yellow solenoid s1 raise?
    brn/ rd- relay signal
    red- acc power fused
    blk/org- ground

    diamond touch pad controls:
    blk- coil A
    dk gr- coil C
    red- coil B
    org- ground
    blue- power 10amp fused
    white- solenoid control

    blk/org fisher to org diamond

    red fisher to blue diamond

    brn red fisher to white diamond

    is this right so far? and what solenoid controlls go to what coil controls....
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    It won't work, the valves are not functioned the same between the two different brands to allow you all four functions. A Fisher uses one valve to perform two different functions, a Meyer does not. You can have either lift/lower, or left/right angle, but not all four together.
     
  3. ed39

    ed39 Senior Member
    Messages: 120

    Well bummer that stinks,