1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

First Meyer (used) & transfer

Discussion in 'Meyer / Diamond Products Discussion' started by RLM, Jul 17, 2011.

  1. RLM

    RLM PlowSite.com Addict
    Messages: 1,270

    I have always run Fisher. I bought a Jeep Wrangler from my brother last fall to do sidewalks with (@ schools) & was going to mod & put a 7'-6" V on (to the tune of over 5K). I came across a (or what I think was $ 250) a really good deal on a 6'-6" Meyer TM, with a poly moldboard. Was on a 2000 Jeep Wrangler I'm going to put it on a 1997, the only thing the guy didn't have is the lower frame work, he couldn't get it off when he traded his Jeep in, I believe that will run me about $ 500. I have the lift assembly (round recievers that slide into lower assembly), both wiring harnesses, pump, & controler, lights,etc. From what I can see I have 1 light that is loose, the deflector looks like it needs to be longer, the cutting edge is good, angle cylinders are questionable (chrome is pitted & rusted) & I am planing on installing small rubber blocks at each end that stick out a couple inches for curb running.
    I realize I'm not comparing apples to apples (Fisher V to Meyer straght blade) but I need it to be as productive as possible, with minimal breakdowns. For the cost savings, monies are tight due to extrodinay growth, I couldn't pass this up. Any tricks or tips in these plows ?
     
    Last edited: Jul 17, 2011