1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

F350 with western wiring 2 plug plow to 3 plug plow

Discussion in 'Truck & Equipment Repair' started by JDAMECANIX, Jan 17, 2016.

  1. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    I bought a truck with western attachement and wiring, but it 2 plugs and controller is 4 pin, my plow is 3 plug and with this harness the lights works, but now for controls, is the harness 26345 the right one i need? My headlight harness has a square 4 pin plug vs the 26345 has flat 4 pin, do i just repin these? Or must change the whole thing?
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,979

    So the truck is fleet flex and your plow isn't?
    That what your trying to say?
     
  3. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    Ive been reading for the past week and not sure what i have but i think its for vplow....
     
  4. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    But the way i see it, the 26345 harness plugs into the relsy box,,, my harness dosent... So im ******?
     
  5. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,681

    You are going to have to replace control harness, truck side battery harness, add a solenoid under the hood, get a 6 pin control and the adapter for the control harness to attach to light harness.
     
  6. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    would harness 26431 work for me?
     
  7. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,681

    Sorry but I don't know harness numbers by heart. I would have to look them up.
     
  8. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    I think i got
    It
    Figure out
    Gonna go see tomorow
    Dealer
     
  9. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,681

    26345 control harness
    63411 battery harness
    29047 control adapter
    5794K-1 Solenoid

    Will also need the 6 pin controller and a short battery cable to go from battery to solenoid. I may be interested in the fleet flex wiring if you do decide to do the swap.
     
  10. JDAMECANIX

    JDAMECANIX Junior Member
    Messages: 6

    Thats what i tought!! Thx so mutch where bout are you
     
  11. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,681

    Just outside of Harrisburg PA.