1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

F/S Fisher/Western wiring & Iso module

Discussion in 'Used Plowing and Truck Equipment Forum' started by 2COR517, Dec 30, 2009.

  1. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    I have some Wiring Harnesses and an Isolation Module for sale. It was installed two years ago, I just removed it from my 97 K2500 with the four bulb composite lights. I was running the XtremeV with Intensifire lights. Like new condition. No damage, cuts, splices, tape, etc. All underhood/iso connectors are perfect. Grill connectors are very very good.

    Asking prices as marked.

    29060 - Isolation Module. Three plug - $60

    28253 - Plug in Harness HB3/HB4 - This is the harness that connects the truck lights to the Isolation Module - $85

    26357 - 11pin Vehicle Lighting Harness - This is the harness that runs from the Iso module to the grill for the plow lights to plug into - $85

    28213K - 11pin Plowside Lighting Harness - This is the harness that runs from the lights to the Grill Connector. This has been modified. The light ends have about 6 inches of wire missing and light connectors are not included. This could be used to wire up the old style sealed beams, or as a repair plug for Intensifires. Fisher does not offer a repair plug at this time - $50

    Pics.....

    DD29060 Iso Module.jpg

    DD28253HB3-HB4.jpg

    DD26357 veh 11pin.jpg

    DD28213K PlowSide 11pin.jpg

    DD28253HB3-HB4.jpg

    DD29060 Iso Module.jpg

    DD26357 veh 11pin.jpg

    DD28213K PlowSide 11pin.jpg
     
  2. Stik208

    Stik208 PlowSite.com Addict
    Messages: 1,316

    How does your plow work with out all this stuff? I knew you did soemthing I would like se it.
     
  3. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    It's top secret.......

    Nothing special, really. I just changed the lighting harness. I wanted to run both the plow and truck lights off relays. Didn't make sense to try and hack into this wiring.

    I'll post some pics and a write up one of these days...
     
  4. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Bumpity bump...
     
  5. twinturbo

    twinturbo Junior Member
    from pa
    Messages: 10

    sent pm on the 28253
     
  6. 02powerstroke

    02powerstroke PlowSite.com Addict
    Messages: 1,188

    Look at this guy with his pictures in side of pictures.
     
  7. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Pretty slick, eh? LOL
     
  8. twinturbo

    twinturbo Junior Member
    from pa
    Messages: 10

    money sent Good Guy !!!! to the top for you
     
  9. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Got it, going out tomorrow.
     
  10. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    The 28253 is gone. Everything else is still for sale.
     
  11. NHresident

    NHresident Senior Member
    Messages: 285

    Is the cable in the last pic been cut in half ?
     
    Last edited: Jan 31, 2010
  12. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    It has not been cut in half, just the ends are shortened by about six inches. I overlayed the detail pics of the ends which might be confusing....
     
  13. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Parts still available.
     
  14. PenniesFrmHeavn

    PenniesFrmHeavn Junior Member
    Messages: 1

    Consider the 28213K 11-pin plow side harness sold.
    Just tell me how much you want for a total cost including shipping and I can PayPal you the e-cash.

    Thanks,

    Matt
     
    Last edited: Dec 2, 2010
  15. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Matt, just want to make sure you understand that plowside lighting harness has been modified. I cut about six inches off each light end.

    You will have to post an e-mail address, I can't send you private messages yet.
     
  16. PenniesFrmHeavn

    PenniesFrmHeavn Junior Member
    Messages: 1

    Shoot - I never got the email notification that you replied to this thread.
    Oh well - usually better late than never.

    I have a 3-plug Fisher MM and the 11-pin plowside plug has one pin that corroded and slipped out - so it's just sort of jammed in there and I'm not taking the plow off or disconnecting it until I can get a new plug for it. Everything works, and luckily I hardly ever use the truck...but I'd like to fix it the right way.

    Why DD/Fisher/Western doesn't make a replacement for this just boggles the mind. I was planning on just cutting off your good 11-pin plowside plug and soldering it onto mine.

    Email (I use this account for craigslist, etc.): 98Windstar at gmail dot cahm

    Thanks,

    Matt
     
  17. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Hey guys, this stuff is still available.
     
  18. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    Will Wakefield ever get 200?
     
  19. Snow Commandor

    Snow Commandor Senior Member
    from 07666
    Messages: 439

    U still have the 26367 truck side harness? Mine crapped out on me just last night & I really don't want to sapend $130 for a new one. pm me with a price and I can send u $$ via paypal.