1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

EZ V wont V, Low beams and signals wont work

Discussion in 'Fisher Engineering Discussion' started by TPCLandscaping, Jan 5, 2013.

  1. TPCLandscaping

    TPCLandscaping Senior Member
    Messages: 296

    My friend had the EZ V on his mounted to an 04 F450 but due to where the truck is stored he decided to have plow mounts and control put on his 2013 GMC 2500.
    i'm not sure which module is on the 450 but they put a green 3 port on his 2500. the problem we have is that the passenger side will V but the driverside wont. The driverside will also loose pressure and leak down. The next problem is he has no low beams when the lights come on and no turnsignals.
    The plow works fine if we leave it in straight blade.

    Anyone have any thoughts?
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,973

    Assuming it works fine with the Ford,,just having issues with the Chevy??