1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Ez V from Ford onto GMC questions

Discussion in 'Fisher Engineering Discussion' started by jmb49735, Sep 2, 2013.

  1. jmb49735

    jmb49735 Junior Member
    Messages: 12

    I bought an EZ v that came off of a 2002 Ford F250. The plow is 3 plug with a white label 4 port iso mod. What do I need to do to make this work on my truck. It is a 1998 GMC K2500. I have all the ford truck side wiring. I'd like to do this as cheap as possible. It's a $500 plow going on a $1500 truck. I'd be good with putting the plow head lights on a toggle switch if that can be done. Also can someone tell me what the difference is between the push plates for a 7200gvw and 8600gvw? I know the Western and Boss mounts were the same for all GM trucks of this vintage. TIA
     
  2. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    well everything will work on that truck as far as wiring except for the headlights. Buy a set of headlight harnesses on ebay and you will be all set. As far as mounts. The the 7200 and 8600 gvw are not the same mounts. A 2500 7200 gvw should have 6 lugs and take the same plates as a 1500 part # 7138. a 2500 (heavy duty) 8600 gvw should take a 7125 mount.
     
  3. jmb49735

    jmb49735 Junior Member
    Messages: 12

    Any idea what part # I need? Will I need 2? One for each side? The only thing I could find on Fishers site was a kit #.
     
  4. brad96z28

    brad96z28 PlowSite.com Addict
    Messages: 1,526

    4 port module will have 2 separate harnesses for the lights one short one long.