1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

error cod L6

Discussion in 'SnowEx Products' started by gagesllc, Mar 25, 2011.

  1. gagesllc

    gagesllc Junior Member
    Messages: 28

    what does the error code L6 on a 1075 salter control mean the salter still works fine but the controler flashes the speed then L6 any ideas?
  2. SnowEx Products

    SnowEx Products Sponsor
    Messages: 118

    L6 is actually an Lb code. This indicates that you have low voltage from the battery to the controller. We suggest you clean all the connections at the battery and the connections in the plug on the rear of the controller. Also, make sure the ground cable is hooked to the battery and not a body ground.
  3. gagesllc

    gagesllc Junior Member
    Messages: 28

    ok thanks i will do that