1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Electrical Connectors for SnowEX spreaders

Discussion in 'Commercial Snow Removal' started by bohan, Nov 11, 2015.

  1. bohan

    bohan Junior Member
    Messages: 3

    Does anyone know where you can get just the connector ends that hook up to the controller on the SnowEX 8500. I'm not paying $350 for each different harness just because the plastic connector is broke. Please advise...thanks
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,960

    Yea, they sell just the ends. I searched and was able to find them
     
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,960

  4. bohan

    bohan Junior Member
    Messages: 3

    Ok...thanks I'll check it out
     
  5. bohan

    bohan Junior Member
    Messages: 3

    I found the connectors I needed at Anderson Power Products. They have the exact ones that come on the SnowEX 8500. I know the power wiring is 6 gauge, does anyone know what guage the wiring is for the Auger that runs back to the controller?