1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Economizer sander problems

Discussion in 'Truck & Equipment Repair' started by dugan978, Jan 11, 2016.

  1. dugan978

    dugan978 Junior Member
    Messages: 1

    New here to the forum. Looking to get some help with a problem I have my economizer sander. It's an older one with 5 wires in the harness. On the controls I have a push button starter a kill switch for the engine and a switch for the conveyor. I currently can't shut the conveyor off. On the back I have a green wire coming out of the harness and I have no idea where it goes I have looked everything. It looked like it broke off of something. It's obviously something for the conveyor. If anyone could give me an idea of where this wire could go or how to get my conveyor to stop on the switch. Thanks in advance!