1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E60 wont move!

Discussion in 'Meyer / Diamond Products Discussion' started by Bmegaplow, Nov 28, 2011.

  1. Bmegaplow

    Bmegaplow Junior Member
    Messages: 6

    Mounted the plow up for the first time this season, and got nothing! Solenoid clicks but does nothing else. Wont go up, down, left, or right-just clicks. Checked the solenoid, fine. Swapped entire pump and motor units and it works great. So it has to be in the motor(which is new) or the solenoids on the pump?
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,595

    Motor not running at all? Try tapping it lightly.
     
  3. Pushin4U

    Pushin4U Senior Member
    Messages: 145

    Check your black and red power and ground cables. Make sure there connected good and have some dielectric grease in them, Mine are notorious for not getting a good connection.
     
  4. Dubl0Vert

    Dubl0Vert Senior Member
    Messages: 178

    If the solenoid clicks but no motor sounds....I bet its the motor...like Kimber said, tap, tap, taparoo. if it starts running than the motor is bad....new or not it happens sometimes
     
    Last edited: Nov 29, 2011