1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E60 leaks down - Any Advice??

Discussion in 'Meyer / Diamond Products Discussion' started by eaoiler, Dec 20, 2009.

  1. eaoiler

    eaoiler Junior Member
    Messages: 3

    E60 pump leaks down after being raised. Replaced o-rings on A valve, does the same. Tried A valve off of another working pump and does same thing. Switched the coil and does the same. Can anyone give me any suggestions as to what could be the problem?? and the solution??
     
  2. poncho62

    poncho62 Senior Member
    Messages: 431

    welcome....Is it having any trouble lifting, that you noticed. My E-47 was leaking down bad the other week. Turned out the bottom cup seal in the lift cylinder was shot. Yours may be partially bad.
     
  3. eaoiler

    eaoiler Junior Member
    Messages: 3

    Goes up and down fine. The seal on the lift cylinder may be bad?
     
  4. poncho62

    poncho62 Senior Member
    Messages: 431

    Not hard to change.......and only costs about $10