1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E60 angle problems

Discussion in 'Meyer / Diamond Products Discussion' started by mikeyone, Dec 22, 2009.

  1. mikeyone

    mikeyone Junior Member
    Messages: 17

    Hi, I have a E60 pump that raises and lowers just fine but when you try to angle it doesn't move.the motor runs freely It builds no pressure, and the blade won't hold an angle. I replaced the c valve and put an o ring kit in the crossover relief and the pilot vavle piston looks fine what else could it be?
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    For it to build no pressure at all it has to be a cross over valve issue thus bypassing pump pressure back to the reservoir. Either a damaged component in it or mis-assembled or both.