1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

e47 wont lift or angle left

Discussion in 'Commercial Snow Removal' started by horseshoer, Dec 30, 2012.

  1. horseshoer

    horseshoer Junior Member
    Messages: 13

    I rebuilt it cause last year it wouldn't angle and lift would slowly leak down. i replaced all coils and B and C valve. it angles left when when toggled up, clicks when toggled left and toggled right works. i am know 5 days into working on it counting rebuild and changing axle on truck, but getting frustrated. All this snow and I'm stuck in the shop.
     
  2. horseshoer

    horseshoer Junior Member
    Messages: 13

    also new to the site and still pretty new to plowing.
    Any advise would be much appreciated Thanks
     
  3. 95HDRam

    95HDRam Senior Member
    Messages: 157

    Move this to the Meyer thread, we will help ya there. Welcome to the site.
     
  4. Plow More

    Plow More Senior Member
    Messages: 172

    I would start by making sure everything is wired correctly between the controller and the solanoids/pump relay, it sounds like some wires ended up hooked up improperly.
     
  5. horseshoer

    horseshoer Junior Member
    Messages: 13

    how do i move it
     
  6. 95HDRam

    95HDRam Senior Member
    Messages: 157

    Just start a new thread under the Meyer Plow section.