1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 pump seal number

Discussion in 'Meyer / Diamond Products Discussion' started by broncscott, Jan 16, 2010.

  1. broncscott

    broncscott Senior Member
    Messages: 101

    Is there a crossover number for the pump shaft seal on an E47 or is this a propreitary seal. Need one this weekend. Thanks
     
    Last edited: Jan 16, 2010
  2. Nasty-Z

    Nasty-Z Senior Member
    Messages: 370

    15877 is the Meyer # , but i'm sure you already knew that.

    I had a cross reference # buried away at one time but I cannot find it right now , it was a C/R seal # as it came from NAPA when I worked there , I found it by using the C/R book and looking it up by dimensions .

    Not much help I know but there is one out there .

    TOM
     
  3. broncscott

    broncscott Senior Member
    Messages: 101

    Thanks Tom, I will keep searching. Scott
     
  4. true fan

    true fan Junior Member
    from 53140
    Messages: 1

    pump shaft 15877 or 15581

    I know one is bigger but are these both pump shaft seals? is one for the 3" motor and the other for the 4 1/2" motor? thanks in advance for any input.