1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 hit switch twice to raise plow

Discussion in 'Meyer / Diamond Products Discussion' started by fireball10x, Nov 22, 2008.

  1. fireball10x

    fireball10x Junior Member
    Messages: 2

    I have a meyer e47 and I hit the switch once and it spins the motor and takes some weight off the plow but it won't go up until i release the switch and hit it again.Any help would be appreciated
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    1. Worn lift/lower switch
    2. Poor wiring connection somewhere between the lift/lower switch and the B coil.
    3. Weak B coil.
    4. Sticking B valve.

    Here's the troubleshooting page for your setup: E47 troubleshooting manual
     
  3. sefh

    sefh Senior Member
    Messages: 437

    Sounds more like a weak coil or stuck valve.
     
  4. fireball10x

    fireball10x Junior Member
    Messages: 2

    Thanks Guys I'll check the b coil today,the switch and wiring is new and I do have another unit for parts