1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E47 Angle Problem

Discussion in 'Meyer / Diamond Products Discussion' started by dlang, Dec 15, 2010.

  1. dlang

    dlang Junior Member
    Messages: 3

    My buddy just rebuilt his E47. He took it completely apart cleaned and painted everything and changed all seals and o-rings. He even put a new sticker on it. it looks nice...........but.......... The up and down is good. When he puts the toggle switch to angle either way it starts to move and stops, You can grab a hold of the blade and move it side to side and both rams go in and out. With the toggle switch in the middle you can still move the blade side to side. Any ideas ?

    thanks
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Incorrect assembly such as an incorrect or missing O-ring or component in either the cross over relief valve or pilot piston assembly. Need to recheck all work performed.