1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E3 LED's Strobe N More

Discussion in 'ATV / UTV Snow Removal' started by atvsnowplower, Dec 9, 2011.

  1. atvsnowplower

    atvsnowplower Junior Member
    Messages: 18

    I received my four E3 (Amber) LED'S yesterday, along with SHO-ME Switch Assembly 11.002GSM. I'm installing these LED'S on my four-wheeler and I'm seeking some help with the wiring. It is my opinion the wiring diagram is poor.

    Each light head has five wires come from it...


    The switch assembly has three wires

    Red; This goes to the positive battery post
    Black; This goes to the negative battery post
    White; Where does this one go?

    I'm seeking advice on where each one of these wires need to connect to.

  2. pjprod

    pjprod Junior Member
    from ny
    Messages: 22

    Are you talking about a switch or relay? If you wire a switch from a positive to a negative of a battery...you will have a dead short. A switch is only wired on the positive or hot wire..this is basic electricity.. if you are not sure....i would be careful!! On my strobes, i know one wire is used to set the strobe pattern....you touch one wire to a battery and you can set the strobe to blink a certain way.