1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-Brake Light

Discussion in 'Chevy Trucks' started by misanthrope, Nov 12, 2004.

  1. Is there a ground wire or sensor that would cause the brake light to stay on?
    Had the rear brakes done and it still stay's on.
    Any ideas?

    1990 Chevy K5 Blazer

    I will check the plunger.....
     
    Last edited: Nov 12, 2004
  2. derekbroerse

    derekbroerse 2000 Club Member
    Messages: 2,377

    On a '90, there are two ways the light can come on.

    1) There is a switch on the parking brake pedal, near the firewall.

    2) Low fluid pressure switch in the proportioning valve on the front crossmember.

    Grounding the wire (I think its a tan colour) will make the light come on. If they visually check out, unplug each one at a time and see if the light goes out. You may have a bad switch or something.

    This is assuming you have proper brake pressure, of course. ;)
     
    Last edited: Nov 12, 2004