1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-68 won't dismount!!!

Discussion in 'Meyer / Diamond Products Discussion' started by fireguy1, Feb 22, 2010.

  1. fireguy1

    fireguy1 Junior Member
    from 44288
    Messages: 2

    Anybody have this problem? Should I try couplers? Thanks, Rich
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Does the motor run when you try to dismount? If so did you pull the pump cover off and check the E coil (purple wire) for magnetism?

    Need more details.
     
  3. fireguy1

    fireguy1 Junior Member
    from 44288
    Messages: 2

    Sorry...Motor does run, purple wire gets 12 volts magnetic field weak took valve out cleaned and buffed bottom of E coil due to oxidation. When put back together it worked but not sure which of the above elements was the culprit though. Thanks again for your help. Rich
     
  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Was likely just a sticky E valve then. Good to hear it's working now. :drinkup: