1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-60 wont stop running

Discussion in 'Meyer / Diamond Products Discussion' started by carl b, Oct 29, 2008.

  1. carl b

    carl b PlowSite.com Addict
    from Ohio
    Messages: 1,330

    let me start by saying i did a search but can't find one that is the same . so sorry if i didn't find the correct one .

    ok my e-60 pump is not hooked up has no quick connectors on it . so i hooked up the batt . and it shot fluid all over .:cry: out the far left ram connector (its just a 90 head on there now ) . i tried tapping the solenoid did't help i just need to get the ram up so i can see if it is pitted or rusty
     
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    You tapped on the underhood solenoid correct?
     
  3. StorksAuto

    StorksAuto Senior Member
    Messages: 186

    You can pull the ram up with out running the motor
     
  4. carl b

    carl b PlowSite.com Addict
    from Ohio
    Messages: 1,330

    thanks , is there a release some where ?
     
  5. carl b

    carl b PlowSite.com Addict
    from Ohio
    Messages: 1,330

    thanks , i hooked it up wrong . tried again it works great