1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

e-60 wiring.

Discussion in 'Meyer / Diamond Products Discussion' started by f250man, Nov 24, 2007.

  1. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    Is there a difference with wire goes on which post on the e-60. One post is stamped d1 and one is a2 which one is + and - on the pump. And will it hurt to run it wrong? Steve
  2. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    A2 is the positive and D1 is neg. It won't hurt it if you connect them wrong, but it will spin backwards. :eek:
  3. f250man

    f250man PlowSite Veteran
    Messages: 3,124

    Well I see it must have been running backwards for a while and it still lifts that way. Just happened to look through the manual and it looked different then it was hooked up so I changed it. Thanks for your reply I now have it right. Steve