1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-60 ram soft ????

Discussion in 'Meyer / Diamond Products Discussion' started by the eggman, Jan 11, 2011.

  1. the eggman

    the eggman Member
    from ohio
    Messages: 37

    I am working on a buddy's e-60H that the
    driver side angle ram will not hold an angle.
    The plow works fine except the ram. I cleaned
    out the filters, flushed and filled. I replaced the
    c-valve because it was swollen to the coil. I also
    seen a lot of steel flakes in the back filter.:dizzy:
    Any ideas are welcome. Maybe the cross relief valve ??
    Thanks for you input

  2. WetChicken

    WetChicken Senior Member
    Messages: 132

    Is it leaking or losing fluid at all?
  3. the eggman

    the eggman Member
    from ohio
    Messages: 37

    No leaks
    Now both rams are not holding pressure
    I think the valve block is cracked
    and the pump is putting off the metal flakes
    He is taking i to get tested tomorrow.
    I cant believe the block is over $600 :eek: