1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

E-60 problems again

Discussion in 'Truck & Equipment Repair' started by leaner, Dec 18, 2009.

  1. leaner

    leaner Junior Member
    Messages: 7

    Hello, I finally got my e-60 pump to work, however it raises fine without the blade but when the blade is on it raises slow and as soon as you take your finger off the touch pad it goes back down, any ideas folks, thanks
     
  2. Powastroka

    Powastroka Member
    Messages: 84

  3. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Stuck A valve for sure. And if you're not aware, the A valve/coil is the one closest to the lift cylinder/tank assembly. Remove the nut, slide the coil off the valve and thread the valve out. Easy repair.
     
  4. leaner

    leaner Junior Member
    Messages: 7

    is that the smaller one ?????
     
  5. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    That would be the one.
     
  6. leaner

    leaner Junior Member
    Messages: 7

    I took out my A valve this morning, cleaned it up put it back in :bluebouncand it works A1, thank you for the advice you folks are a blessing, thanks again...