1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

e 47 pump wont go down

Discussion in 'Meyer / Diamond Products Discussion' started by rscottk90, Jan 29, 2010.

  1. rscottk90

    rscottk90 Junior Member
    Messages: 3

    I got a meyers e47 tht wont go down. up left right work fine but the arm will not go down. HELP 12 inchs of white coming tonight.

    solinoide is getting power.
     
  2. JMR

    JMR Senior Member
    Messages: 567

  3. gamberbull13

    gamberbull13 Senior Member
    Messages: 125

    sounds like its your a valve or a coil. check coil for magnetism, if good pull the valve out and see if its gunked up or anything, if no then change it. or you hit somethin with lift ram and maybe bent it its a place to start, oh and make sure powers gettin sent to coil. the a is the black wire
     
  4. rscottk90

    rscottk90 Junior Member
    Messages: 3

    thanks alot. We took out the coil and it was a bit gunked. Been sittin for 2 yrs. Now shes up and running perfectly.

    update - 18inchs - its alot for va thanks for everyones help. ive saved tht link
     
  5. JMR

    JMR Senior Member
    Messages: 567