1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Dxt snow foil thickness

Discussion in 'Boss Plows Discussion' started by vmj, Jan 11, 2015.

  1. vmj

    vmj Senior Member
    from conn
    Messages: 752

    What is the thickness of the rubber foil?? 3/8 or 1/2
     
  2. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,974

    I would say 1/2 if your making it yourself.
     
  3. vmj

    vmj Senior Member
    from conn
    Messages: 752

    Yes planing on it. If I can find some. Going to a place tomorrow...
     
  4. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,974

    Imo the thicker the better. Within reason. The thin stuff will.flop all over the place at even a light breeze. Not to mention fly up at any snow under it
     
  5. vmj

    vmj Senior Member
    from conn
    Messages: 752

    Thanks. I was hoping for 1/2 over 3/8. I think conveyer belt is half inch
     
  6. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,974

    Yes I think it is.
     
  7. vmj

    vmj Senior Member
    from conn
    Messages: 752

    should it be 10 or 8 inches wide ?? im seeing dif aftermarket one listed.
     
  8. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,974

    I made them 10_12 if I remember. You can cut down, you can't add
     
  9. vmj

    vmj Senior Member
    from conn
    Messages: 752

    lol thanks