1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

drivers headlight dim

Discussion in 'Fisher Engineering Discussion' started by CMD, Oct 30, 2013.

  1. CMD

    CMD Member
    from Maine
    Messages: 40

    Picked up a used 02 gmc 3500 never plowed . Installed a mm2 truckside harness did not hook plow to truck at that time. A few days later noted the drivers headlight on the TRUCK was dim .......ditch side was bright . Found we had a shorted control unit which we replaced , was used and assumed it was bad. Week or two later noted same headlight dim , this time the 15 amp fuse is blown on the TRUCK fuse box on fender . Replaced and blew second fuse in a day or two. Have removed fuse box , run over both truck and plow harness and cannot locate any ground or chaf.

    If the fuse is blown and the headlight is still dim is there power backfeeding somewhere ?
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,138

    Do the plow lights work properly? Only guess is maybe one of the connectors is flipped. But not sure how that will affect truck lights.
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,737

    Or the gnd is bad