1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Does anyone have pictures of 72-93 Dodge conventional frame mounts?

Discussion in 'Ram Trucks' started by W250CTD, Dec 2, 2008.

  1. W250CTD

    W250CTD Junior Member
    Messages: 26

    The illustrations are kind of vague on fishers site, especially for the 1/2 ton/ramcharger kits, does anyone have pictures of push plates/pushbeams for a 72-93 Dodge? There's about 7 different kits listed on fisher's site, I'm going to look at a used one this weekend and I want to make sure that I'm getting a W250-350 kit. Is there any numbers stamped on this stuff? Thanks
     
  2. RODHALL

    RODHALL Senior Member
    Messages: 374

    there is no differance between the RC and W100-W350 brackets.

    side bracket should look like this
    http://www.cacuda.com/plowparts/DSC04097.JPG
    box or push plate should look like this (upside down)
    http://www.cacuda.com/plowparts/DSC04098.JPG
    tube mount for newer set ups
    http://www.cacuda.com/plowparts/DSC04099.JPG
    Someone hack job - May take many different forms (this one upside down)
    http://www.cacuda.com/plowparts/DSC04100.JPG

    Sorry the push plate photo is not the greatest
    and sorry i don't have pic of the brackets up under a truck

    Tube mount - uses the same side bracket as older mounts but it has a 5 inch wide 3/4 plate ( may have ribs on one side) bolted to the brace.
     
  3. W250CTD

    W250CTD Junior Member
    Messages: 26

    There are 7 different part #'s for push plate pairs and 2 different push bars for Fisher 72-93 Dodge W150-350 and ramcharger. This is what they all look like pretty much:
    http://www.fisherplows.com/pdf/6392_102291.pdf
    None of your pictures really look like that, the tube mount pic looks like Meyer. Thanks for posting those pics though.
     
    Last edited: Dec 2, 2008
  4. RODHALL

    RODHALL Senior Member
    Messages: 374

    link you posted are to the newer mounts. they were called quick mounts when they came out.
     
  5. W250CTD

    W250CTD Junior Member
    Messages: 26

    They were under the Fisher Conventional mount section of their website, they curl around and come up the front of the bumper and the headgear bolts to it. The only thing that comes off with pins is the A frame. The minute mounts look different. I should have been clearer in my title, I'm looking for fisher pictures.