1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Dodge RAM 1500 Subframe Wanted

Discussion in 'Sno-Way Discussion' started by 05ram1500, Mar 24, 2008.

  1. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    I was given a Sno-Way plow by my brother and would like to put it on my 2002 Dodge RAM 1500. His truck is a 2003 Ford F250 HD.

    After looking at the Snow-Way site and talking briefly to a local dealer, it seems I need to purchase the subframe with the newer style cross member and a conversion kit to convert my 3 pin plow to the newer 4 pin style. The subframe that I need, based on the Sno-Way site is a 99100504 to fit my older style plow with no conversion. The newer subframe would be the 99100681 and use the conversion package 99100743. Is it possible to purchase the newer subframe and the cross member from the older style subframe kit part # 96105436 if I can't get the older subframe package?

    This is what I found on Sno-Way's site, but I am in no way positive this is 100% correct for my truck.

    Also need to know if the wire harness off his truck will fit mine as well, minus headlight adapters.

    Here are the numbers off the plow frame and light frame:

    Plow: HTD200854
    Light Frame: ALC117370

    Any help or access to available parts, preferably the older style subframe, would be appreciated. Thanks!

    RHB
     
    Last edited: Mar 24, 2008
  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    I might have a 0504 mount in stock. If not I have the conversion kit and new style mount.

    I will check on headlights once i get to the shop.

    You can't use the PM system yet so send me an Email at the Snowtech address in my sig. and I'll contact you with pricing.
     
  3. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    Thanks!! Emailing you now.
     
  4. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    One question tho, would I benefit from the new style subframe and the conversion package? Meaning will it look better on my truck when it's disconnected and make for easier disconnect/reconnect? Also does the newer style light bar look nicer?

    Thanks again!
     
  5. nbenallo33

    nbenallo33 Senior Member
    Messages: 826

    dont have one!...
     
  6. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    Got the correct 0504 subframe from a local dealer, seems Sno-Way still had a few in the warehouse.

    I still need to get the correct light harness tho, part #99100529 which the dealer said wasn't in his book?
    The one off the F250 doesn't loop back on both sides, leaving the passenger side headlight connector disconnected which throws the "lamp out" light on the dash on. But looking at the diagrams, on SnoWay's site, they are in deed much different.

    Could anyone locate this harness for me or know of a used one i could buy? Thanks!
     
  7. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Dealer needs to look in his older books. They are still available from the factory.
     
  8. BRAAAP

    BRAAAP Senior Member
    Messages: 114

    Hey where in the north east are you i might be able to help ya out i just took 3 pin mount off my 02 1500
     
  9. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    I'm in CT, of course I just put on the 3 point I bought. Could use some wiring tho!

    Some thing you are willing to sell?
     
  10. BRAAAP

    BRAAAP Senior Member
    Messages: 114

    sorry all i have left is the mount and plow it self
     
  11. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    What type of plow? I could use an a frame to replace my twisted one.
     
  12. 05ram1500

    05ram1500 Junior Member
    Messages: 9

    Basher - Can you get me a price on the light harness? Thanks!
     
  13. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    Will do it Monday.

    Send me a Email at the Snowtech address