1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Do not leave your polymer edge out in the sun

Discussion in 'Fisher Engineering Discussion' started by burlingtonplow, Jan 6, 2010.

  1. burlingtonplow

    burlingtonplow Member
    Messages: 57

    I left my polymer 7'6 cutting edge out all summer and just tried to put it on and it shrunk. I was only able to put 5 of the 8 bolts on. The others are about 1/3 inch away from the hole with everything lined up properly on the others. Also the edge was curved because I laid it upright.
     
  2. ajslands

    ajslands 2000 Club Member
    Messages: 2,033

    thats not good, thanks for advice
     
  3. plowinginma

    plowinginma Senior Member
    from MA
    Messages: 326

    Maybe heat it back up and see if you can get it to fit?? Kinda like the tunnel cover on a truck..(not exactly but closest thing that comes to mind)..
     
  4. burlingtonplow

    burlingtonplow Member
    Messages: 57

    I was able to bolt it back on after two hours. So never mind!