1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Disassembly of "A" "B" & "C" valve

Discussion in 'Meyer / Diamond Products Discussion' started by wsmm, Feb 22, 2009.

  1. wsmm

    wsmm Member
    Messages: 80

    Has anybody ever disassembled and reassembled the "A" "B" or "C" valve (E47)?. If so do you have the instructions?

  2. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,990

    You want to dis-assemble the valve itself? Why?
  3. wsmm

    wsmm Member
    Messages: 80

    Answer to why?

    Have a couple of bad "C" valves and am just curious, been that way since a kid. Always wanted to take thingds apart to see how they were made and then put them back together.

  4. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    There's nothing in them but a single spool and a spring but if your feeling a little exploratory...look on the underside of the valve right below the threaded portion and you'll see a very small/narrow snap ring. Remove the snap ring and it'll pop apart.