1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Diamond Full Hydraulic Setup

Discussion in 'Truck & Equipment Repair' started by Rave71, Oct 16, 2013.

  1. Rave71

    Rave71 Junior Member
    Messages: 7

    So I came across a deal that was too good to pass up on craigslist, I had been hunting for a cheap plow for the past few years... I was willing to put in some leg work if I could get the right price.

    I came across a 7'6" Diamond Belt drive Hydraulic setup, the frame needed some sandblasting and painting and the Plow will need to be re-skinned in the next few years but I am not looking to work, just to take care of my own driveway.

    The plow was mounted to a 96 Ram (will be going on an 01 Ram) and I was told, for what it's worth, that before the plow was removed it still worked. Whoever took it off the donor vehicle cut the harness off at the solenoid block and now I'm trying to figure out how to set it back up. If anyone can identify what model I have, give me and tips or pointers on installation it would be greatly appreciated, thanks in advance for your help. I attached some pictures of the under-hood setup.

    Res.jpg

    Sel.jpg

    Pump.jpg