1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Daniels Pull Plow

Discussion in 'Truck & Equipment Repair' started by Cooter24, Mar 3, 2013.

  1. Cooter24

    Cooter24 Senior Member
    from NE Iowa
    Messages: 268

    I have a Daniels pull plow that quit working. When it first quit the pump was stuck running. Unplugged the power cables to try it again later. Pump was not stuck until trying to move plow. No plow movement and the pump was stuck again. Now the pump isn't stuck but the plow doesn't move. Pump runs when using the switch. Switched coils and checked all wiring. Is the switch bad?
     
  2. Cooter24

    Cooter24 Senior Member
    from NE Iowa
    Messages: 268

    After checking and double checking everything is it possible the motor stuck in the up position and is now needing replaced? When u try to go up or down the motor sounds like its running, nothing happens. Tried jumping wires at motor and same thing. Hope I get this fixed before the next snow. Thanks.
     
  3. Check for a cloged filter
     
  4. Onebadbowtie86

    Onebadbowtie86 Senior Member
    Messages: 106

    Solenoid on the pump