1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Daniel's new 3 in 1

Discussion in 'Daniels Plows Discussion' started by JD Dave, Sep 24, 2009.

  1. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

  2. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    Sounds like some FF is in order.

    Dano, give Greg a call, he needs a few barrels.
     
  3. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

    I would help. LOL
     
  4. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    Looks like a great concept.

    Would love to have one, bet they are spendy.
     
  5. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

    Yes they aren't cheap, list is around 18k.
     
    Last edited: Sep 24, 2009
  6. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    So I watched the video. It looks like the ends of the blade are on a hinge. The "wings" are moved by hydraulic actuators. Did I miss something?

    Looks well built. Does that have a trip edge?
     
  7. JD Dave

    JD Dave PlowSite Fanatic
    Messages: 11,046

    Yes it's a mouldboard trip.
     
  8. Mark Oomkes

    Mark Oomkes PlowSite Fanatic
    Messages: 10,868

    Nope, no need to worry about saving the transmission on a loader.
     
  9. 2COR517

    2COR517 PlowSite Fanatic
    Messages: 7,115

    What happens if you hit something with both wings forward?
     
  10. Triple L

    Triple L PlowSite Fanatic
    from Canada
    Messages: 5,988

    Do i see a Noway Rev plow there 100% or what.... I wouldnt touch that thing... exact same wing concept....
     
  11. Bruce'sEx

    Bruce'sEx Senior Member
    Messages: 873

    Well I did the see the ends of the wings on the cutting edges are angled, so the wings may be able to tip up a little in the box setup. but Myself rather have a trip edge, then a trip board with wings.
     
  12. Nestech

    Nestech Senior Member
    Messages: 105

    Go with a Horst Snow-wing. You can rotate the wings full back to make a reverse box blade. And Trip Edge design so it will trip even when in box!
     
  13. snowsniper1

    snowsniper1 Senior Member
    Messages: 239

    what size is that offered in
     
  14. T-MAN

    T-MAN PlowSite.com Addict
    Messages: 1,363

    Seems to lift alot better, I doubt it needs -10w hydraulic oil either :jester:
     
  15. The Big Push

    The Big Push Junior Member
    from Ontario
    Messages: 19

    We've got 6 Horst box blades. The wings trip straight back and up, just DO NOT trip the wings on an angle! The wings will bend out and never get a good seal against the mold board again. Always leaves windrows now. I still believe the Horst is the best blade to get though. We've also got a 16' Blue bird we use for the city. Our operator found it very convenient to put out just one wing, but the stress that created on the blade really did a number. We've found that front mount blades are really nice for the operator, but the tractor's just take a beating. Keep a real close eye on the front end, check all the steering componants every storm, and watch for broken bolts on the front wheels.