1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cylinder Switch

Discussion in 'Commercial Snow Removal' started by edshipp19, Nov 4, 2003.

  1. edshipp19

    edshipp19 Senior Member
    Messages: 147

    After sandblasting and painting the wings of my older Fisher Vplow i started to work on prepping the the rest of the mount. There are obvious dents in the A frame where the hydro fittings on the angle cylinders have hit it under extreme impact i guess. My question is, could the cylinders be be spun 180 degrees to put the fittings to the outside so the chance of breaking the fittings is reduced?
    Thanks in advance
  2. wyldman

    wyldman Member
    Messages: 3,265

    Yes,I would turn them around.Makes it much easier to change the fitting too.