1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

cutting edges

Discussion in 'Fisher Engineering Discussion' started by CAT420, Feb 5, 2009.

  1. CAT420

    CAT420 Senior Member
    Messages: 182

    i need help/number in massachusetts for cutting edges. Looking for a cutting for an xblade and conventional 8' blades....

    Reg. Plow- Cutting edge 8foot by 8inch by 5/8in thick...need 5/8 highway punch

    xblade- Cutting edge 8foot by 6inch by 5/8in thick...need 5/8 highway punch

    i know the xblade one is hard to come by as most places only make it 1/2in thick but my buddy needs one by next storm so im on the hunt and i also need one by next storm thanks for any help
     
  2. justme-

    justme- 2000 Club Member
    Messages: 2,138

    Most Napa stores will have, Atlantic Broom in Boston will have too. I'm sure there are others closer to you tho.
     
  3. CAT420

    CAT420 Senior Member
    Messages: 182

    atlantic broom is dead out of all there material except 1/2 inch and napa stores?
     
  4. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Permaline has them. As for the xblade get regular cutting edge not that damm flip thing. I just got a 8x6x5/8 with 5/8 holes non flip. You just dont use the 2 out side bolts. Lines up perfect. Not sure about the 8 inch one but they had 6inch ones. just bought mine on Monday there.



    Permaline
    132 Court St
    Brockton, MA 02302
    (508) 588-6240
     
  5. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Actually they are very close to him now. They moved a couple years ago to Taunton and are just off Myle Standish
     
  6. CAT420

    CAT420 Senior Member
    Messages: 182

    Yea i just got my curb guard there for $60 the place was a mad house waited in line about an hour..but there out of edges except 1/2in
     
  7. ColliganLands

    ColliganLands PlowSite.com Addict
    Messages: 1,854

    im ordering an 5/8 by 8 for my plow from my dealer want me to price you one?
     
  8. cretebaby

    cretebaby PlowSite Veteran
    Messages: 4,162

    Do you guys think the 5/8 is that more valuable than the 1/2
     
  9. ColliganLands

    ColliganLands PlowSite.com Addict
    Messages: 1,854

    yes i got a 1/2 inch for cheap brand new and its small and flmisy looking compared to my 5/8 one thats on there now
    so im sending the 1/2 back and the dealer is getting me a 5/8 one
     
  10. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    Here is my new edge Havent hosed off plow yet. But stick with a 6inx8ftx5/8 for the Xblade. I feel the 8 inch one would rub and bang ground a bit when turning and such. The 6 does it a little when cut all the way. Dont get that flip thing. The plow cuts so nice with this edge

    [​IMG]

    [​IMG]
     
  11. CAT420

    CAT420 Senior Member
    Messages: 182

    yes, especially for municipal plowing.
     
  12. CAT420

    CAT420 Senior Member
    Messages: 182


    well the xblades for my neighbor and he will only run the 6inch on it not the 8, we just tried calling permaline already closed:realmad: hopefully theyll have one. thanks for you help
     
  13. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

    LOL yeah they close at 4. Those 1/2 flipables are going to become scarce unless you go to a dealer. They wear down so fast. Then you have to flip it. Screw that!!!! its cold it out!!!
     
  14. CAT420

    CAT420 Senior Member
    Messages: 182

    yea we run all highway punch
     
  15. ColliganLands

    ColliganLands PlowSite.com Addict
    Messages: 1,854

    want me to find out how much they are from my dealer hes ordering me one i can just add more to it
     
  16. CAT420

    CAT420 Senior Member
    Messages: 182

    yes please, i need the bolt holes to be 5/8 though im sure you upgraded also from 1/2...but if you can get me a price that would be awesome and maybe for the 8x6x5/8 for my neighbor if you dont mind..thanks kyle
     
  17. ColliganLands

    ColliganLands PlowSite.com Addict
    Messages: 1,854

    ill give him a call and see what he can do.. minehad the 5/8 on it when i got the plow and i have the crappy 1/2 one sitting my garage that i was going to use for the rest of the season but i changed my mind
     
  18. CAT420

    CAT420 Senior Member
    Messages: 182

    anyone else in the area know of any one that has them available just for the 8'x8'x5/8 5/8 punch we found one for the xblade..thanks
     
  19. BigDave12768

    BigDave12768 PlowSite.com Addict
    Messages: 1,446

  20. silvercity

    silvercity Senior Member
    Messages: 117

    Are any of you guys running the factory curb wear shoes?????? I just got them for my 9ft and I think it will make a huge difference....