1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

cutting edge angle

Discussion in 'Fisher Engineering Discussion' started by camaro 77, Jan 21, 2010.

  1. camaro 77

    camaro 77 Senior Member
    from ma
    Messages: 283

    I was reading some where here about cutting edge angle and someone posted achart for the angle I have a lifted 2.5 inch f350 and my X blade is in the middle hole in the rear I go thru cutting edges fast 2-3 per year wondering if changing the angle would helphope this makes sense
     
  2. RepoMan207

    RepoMan207 PlowSite Fanatic
    from Maine
    Messages: 5,031

    The A frame has to be level. That's your only true guide. Drop the plow on level ground and eyeball it from the side to see if it needs to go up or down. If you use plow shoes, make sure there not on.