1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

curtis v box

Discussion in 'SNO-PRO PLOW AND ACCESSORIES by Curtis' started by jeffw, Dec 21, 2006.

  1. jeffw

    jeffw Senior Member
    Messages: 107

    curtis spreader.... we just purchased one and on a test run with a part load alot of salt spilled out the front of the v. this is the 1.7 yd steel,

    where the chain comes through the box there is nothing to hold back the salt. why is that?

    anyway we added a peice of convor rubber inside cut to fit to stop this and it worked perfect.

    only problem we had so far was the throttle control box the black one on the motor had a bad solder job, one lead came off in transit i would assume as it worked when we first installed it. so i redid both solder joints properly, they only touch them on the lead and sting some solder in there not enough to hold the wire on the contacts.

    ill report on how it work once we get some real weather to spread some salt.