1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

curtis sno-pro 3000 wont remain in float

Discussion in 'Truck & Equipment Repair' started by rotax800r, Dec 7, 2010.

  1. rotax800r

    rotax800r Junior Member
    from iowa
    Messages: 8

    i have a newer curtis sno-pro 3000 8 foot plow and all functions work up down left and right .
    but i cannot put plow in float i check voltage at remote connection and it was good . then i checked the voltage at the solenoid and it was good . you can hear the solenoid click when you hold down button down . so i took off the solenoid and powered it up and ran a bolt through it and it sucked the bolt through so i know its working . then i pulled off the valve and cleaned as good as possible then blew through it . i then tried to push the plunger in and it moved maybe an 1/8 inch only uncovering the first holes by about quarter .

    any ideas ? :gunsfiring:
     
  2. rotax800r

    rotax800r Junior Member
    from iowa
    Messages: 8

    anyone ? anyone ?