1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Curtis sno pro 3000 keeps blowing fuse at the switch

Discussion in 'SNO-PRO PLOW AND ACCESSORIES by Curtis' started by clc2007, Nov 14, 2011.

  1. clc2007

    clc2007 Member
    Messages: 74

    Had the plow in about 3 weeks ago drove about 20 miles with no problems, hooked it up today and it blows the fuse after about 5 minutes, moved my power source from a 10 amp to a 20 amp and now it is fine? So my question is why did it work fine before on a 10amp and now it wont? The only change i made was to a larger batterie in the truck.
     
  2. clc2007

    clc2007 Member
    Messages: 74

    Ok i found my own problem the wire from the switch had a little extra bare wire and keept bouncing to ground! Feel like an idiot but atleast it is fixed