1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Curtis Plow Problem

Discussion in 'Truck & Equipment Repair' started by tommypenguin, Dec 26, 2011.

  1. tommypenguin

    tommypenguin Junior Member
    Messages: 2

    I just replaced the lift hose on my Curtis. After re-filling the reservoir the plow goes up and down great but it won't angle either direction. I can hear the pump motor run when I try to angle it but the blade doesn't move. I could really use some help. It has plenty of fluid so maybe its just a bleed down issue?
     
  2. NICHOLS LANDSCA

    NICHOLS LANDSCA PlowSite Veteran
    Messages: 4,310

    Angle cylinders are full of air it'll work out, or you could push one side against a curb while hitting the angle function to get it to angle. Once you get it to angle recheck your fluid level you'll be low
     
  3. tommypenguin

    tommypenguin Junior Member
    Messages: 2

    Thanks for the reply. I'll give it a shot and let you know.