1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Commercial Salt Spreader

Discussion in 'Truck & Equipment Repair' started by rcnease, Dec 26, 2013.

  1. rcnease

    rcnease Member
    Messages: 31

    Hello, I have commercial salt spreader roughly 1.8 CUYD. The conveyor is chain driven. The chain on the one side seems to have a link or two that isn't as flexible at the linkage area as it should be and it is almost skipping the cog gear when it reaches it. I have sprayed them down with a transmission fluid / diesel mixture before and after each storm but it doesn't seem to get any better. Does anyone have any suggestions on how to free this link up so I don't end up breaking something?

    Thanks in advance
     
  2. vinnys

    vinnys Senior Member
    Messages: 112

    Heat it up.
     
  3. SnowGuy73

    SnowGuy73 PlowSite Fanatic
    Messages: 24,868

    Agreed, have you tried heat?