1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Chevy/GMC Rear "Extreme Duty" timbrens FS

Discussion in 'Used Plowing and Truck Equipment Forum' started by WilliamOak, Dec 17, 2011.

  1. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    I have a set of rear "extreme duty" timbrens, I bought them from a local guy with a set of fronts also. I installed the fronts and I have airbags in the rear of my truck so I have no use for these. These are not the normal timbrens that are rated for 6000lbs or whatever it is, they rate at 12k or something close to that. I found them for $368 online, not many places had the heavier ones. I would like to get $250. They are under a year old

    Would trade for a mini LED bar or something of the likes, PM me with offers/trades worst I can do is say no.


    Bill no posting. ;)
     
  2. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Bump, anyone interested?
     
  3. mule585

    mule585 Member
    Messages: 74

    what year truck do they fit
     
  4. White Gardens

    White Gardens 2000 Club Member
    Messages: 2,665

    Slightly Interested also.

    Do you have any pics or part numbers? Would like to mount them on my Dump truck if they will fit.

    ...
     
  5. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Should be '01-'10 since the frames didn't change until '11
    I will get a part # tomorrow so you guys can double check
     
  6. White Gardens

    White Gardens 2000 Club Member
    Messages: 2,665

    01 was the last year for my style of truck as far as I know. After that the larger dumps got changed with the new body style and IFS.

    I just need to mainly know the part number to see if I can make them work. I'm also getting ready to do the front leaf springs on my truck and would like to possibly put Timbrens on the back for a bit more stability.

    ...
     
  7. NDG

    NDG Junior Member
    Messages: 22

    are these the same ones someone was selling for 300 hundred front and rear?
     
  8. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Sounds good, I'm sure you could make them work if they don't fit but it's just a matter of how much you would have to do and if it's worth it at that point..
     
  9. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Part # is GMRTT35 from what I could find
     
  10. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Bumpin this back up! somebody has to want these!! I have zero need for them as my truck has airbags in the rear
     
  11. bugthug

    bugthug Senior Member
    from Pa
    Messages: 268

    PM to you
     
  12. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Pm returned
     
  13. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    Bugthug brought to my attention a place on eBay where they're $280 shipped. I did not realize that so I'll adjust my price accordingly.
    $200+ shipping, these were only used a few months and have everything you need.
     
  14. White Gardens

    White Gardens 2000 Club Member
    Messages: 2,665

    Need to pass right now. I got to address the front end sag first on my truck, rear will be second.

    ....
     
  15. chevyman51

    chevyman51 Senior Member
    Messages: 537

    Do you know if these will fit a 98 gmc 2500
     
  16. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    idk for sure look up the part # on their site to double check
     
  17. NDG

    NDG Junior Member
    Messages: 22

    ill give you 125 shipped for them
     
  18. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    No thank you if I don't sell them I'll try and make them fit on a buddy's ford
     
  19. NDG

    NDG Junior Member
    Messages: 22

    whats the lowest you would take
     
  20. WilliamOak

    WilliamOak PlowSite.com Addict
    Messages: 1,986

    $200 shipped is what I'd like at the moment