1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

change bumper for plow mount

Discussion in 'Ford Trucks' started by RhinoL&L, Sep 19, 2007.

  1. RhinoL&L

    RhinoL&L Senior Member
    Messages: 860

  2. CNY Plow

    CNY Plow Senior Member
    Messages: 145

    probably, most do need cutting.
    check the meyer site for the mount required, then get the spec's for that mount.
     
  3. Focker

    Focker Member
    Messages: 31

    not sure about the Meyer but mine had to be trimmed for my Western
     
  4. RhinoL&L

    RhinoL&L Senior Member
    Messages: 860

    bump. Anyone else?
     
  5. mike psd

    mike psd PlowSite.com Addict
    from pa
    Messages: 1,028

    i do think going to need to trim it sum. they guy over at the key shop next to my shop has a chevy older 2500 with a meyers and his was trimmed some nothing major
     
  6. B&B

    B&B PlowSite Fanatic
    Messages: 12,777

    Shawn, you don't have to trim the air dam with the EZ mount plus/05-up F series combo..
     
  7. 84deisel

    84deisel Senior Member
    Messages: 696

    no trimming . We have an 06 f350 with the ez plus. But I do warn that the mount looks hidious without the plow on.