1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cat 420 IT aux. 8 pin plug wiring for metal pless

Discussion in 'Heavy Equipment' started by cmo18, Dec 9, 2014.

  1. cmo18

    cmo18 Senior Member
    Messages: 814

    Just got my new metal pless 10-16 plow, and instead of running the 2 button controller into the cab I would like to wire it to the 8 pin aux plug on the loader and control everything through the pilot control joystick.

    Does anyone have the wiring diagram for the plug? It would save me a few hours of figuring out what pin is for what! The plow only has 4 wires, two to control one selector valve 2 for the other, so it should be straight forward?

    Any input would be greatly appreciated
  2. Greenmtboy

    Greenmtboy Senior Member
    from Vermont
    Messages: 372

    Should only take seconds to figure out what pins do what. Grab a buddy, a test light and one of you check the pins as the other activate the buttons on the controller. My guess is you wil need two powers and one ground.