1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Cannot remove vibrator

Discussion in 'SnowDogg Snow Plows' started by finallygot1, Dec 2, 2013.

  1. finallygot1

    finallygot1 Member
    Messages: 36

    I have a SHPE1500, I have removed the four nuts and the vibrator will not come off. Is there something else holding it?
    Thanks
     
  2. ringahding1

    ringahding1 Senior Member
    Messages: 260

    Do you know the serial # ? The manual that came with it will have that # right on the very front

    Mine is a 6500
     
  3. dieselss

    dieselss PlowSite Fanatic
    Messages: 10,968

    Usually they are rusted on, or corroded on. Prybar and a hammer usually gets them off. Along with penetrating oil.
     
  4. basher

    basher PlowSite Fanatic
    from 19707
    Messages: 8,992

    No, Its just corrosion bound.
     
  5. Whiffyspark

    Whiffyspark 2000 Club Member
    from SOMD
    Messages: 2,402

    I just had this problem this morning I took the through off. I used the air hammer and pushed the bottom two loose you cab leave the top two in