1. Welcome to PlowSite. Notice a fresh look and new features? It’s now easier to share photos and videos, find popular topics fast, and enjoy expanded user profiles. If you have any questions, click HELP at the top or bottom of any page, or send an email to help@plowsite.com. We welcome your feedback.

    Dismiss Notice

Can you fit fisher push plates from a 95 chevy 1500 to a 2001 chevy 1500?

Discussion in 'Residential Snow Removal' started by Mitchplows, Oct 17, 2013.

  1. Mitchplows

    Mitchplows Member
    Messages: 47

    I bought a used fisher minute mount 1 plow that came off of a 95 chevy 1500 and everything fits on my truck..... But it doesn't look like the push plates will. If they don't fit then can I fabricate them to fit? Thanks!
     
  2. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,679

    The 95 mount will not fit a 2001 without modification. Anything can be accomplished by a good fabricator. Personally I would buy the correct mount.
     
  3. Mitchplows

    Mitchplows Member
    Messages: 47

    Ok. I have a chance to buy a set for $125. Is that a good price?
     
  4. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,679

    Mount for $125? That is very good price.
     
  5. Mitchplows

    Mitchplows Member
    Messages: 47

    Sounds good. Thanks very much
     
  6. Mitchplows

    Mitchplows Member
    Messages: 47

    Also, it's a 4 port 3 plug system and there's 3 wires that looked like they were spliced in somewhere. The 4 plugs that go to the parking and headlights are hooked up and it all works fine. Any suggestions on where those 3 wires go?
     
  7. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,679

    Those should be for tapping into Park, Left turn and right turn lights.
     
  8. Mitchplows

    Mitchplows Member
    Messages: 47

    Shouldn't the isolation module do that automatically though?
     
  9. kimber750

    kimber750 PlowSite Veteran
    Messages: 3,679

    It needs a trigger source. How else will it know when park lights or signals are being used?
     
  10. Mitchplows

    Mitchplows Member
    Messages: 47

    I think I see what your getting at I'll check it out thanks for the info